Item request has been placed! ×
Item request cannot be made. ×
loading  Processing Request

Pool boiling of nanofluids on biphilic surfaces: An experimental and numerical study

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • Additional Information
    • Publication Information:
      Multidisciplinary Digital Publishing Institute
    • Publication Date:
      2021
    • Collection:
      Universidade of Minho: RepositóriUM
    • Abstract:
      This study addresses the combination of customized surface modification with the use of nanofluids, to infer on its potential to enhance pool-boiling heat transfer. Hydrophilic surfaces patterned with superhydrophobic regions were developed and used as surface interfaces with different nanofluids (water with gold, silver, aluminum and alumina nanoparticles), in order to evaluate the effect of the nature and concentration of the nanoparticles in bubble dynamics and consequently in heat transfer processes. The main qualitative and quantitative analysis was based on extensive post-processing of synchronized high-speed and thermographic images. To study the nucleation of a single bubble in pool boiling condition, a numerical model was also implemented. The results show an evident benefit of using biphilic patterns with well-established distances between the superhydrophobic regions. This can be observed in the resulting plot of the dissipated heat flux for a biphilic pattern with seven superhydrophobic spots, δ = 1/d and an imposed heat flux of 2132 w/m 2 . In this case, the dissipated heat flux is almost constant (except in the instant t* ≈ 0.9 when it reaches a peak of 2400 W/m 2 ), whilst when using only a single superhydrophobic spot, where the heat flux dissipation reaches the maximum shortly after the detachment of the bubble, dropping continuously until a new necking phase starts. The biphilic patterns also allow a controlled bubble coalescence, which promotes fluid convection at the hydrophilic spacing between the superhydrophobic regions, which clearly contributes to cool down the surface. This effect is noticeable in the case of employing the Ag 1 wt% nanofluid, with an imposed heat flux of 2132 W/m 2 , where the coalescence of the drops promotes a surface cooling, identified by a temperature drop of 0.7 °C in the hydrophilic areas. Those areas have an average temperature of 101.8 °C, whilst the average temperature of the superhydrophobic spots at coalescence time is of 102.9 °C. For low concentrations as ...
    • File Description:
      application/pdf
    • Relation:
      https://www.mdpi.com/2079-4991/11/1/125; Freitas, E.; Pontes, P.; Cautela, R.; Bahadur, V.; Miranda, J.; Ribeiro, A.P.C.; Souza, R.R.; Oliveira, J.D.; Copetti, J.B.; Lima, R.; Pereira, J.E.; Moreira, A.L.N.; Moita, A.S. Pool Boiling of Nanofluids on Biphilic Surfaces: An Experimental and Numerical Study. Nanomaterials 2021, 11, 125. https://doi.org/10.3390/nano11010125; http://hdl.handle.net/1822/72355
    • Accession Number:
      10.3390/nano11010125
    • Online Access:
      http://hdl.handle.net/1822/72355
      https://doi.org/10.3390/nano11010125
    • Rights:
      info:eu-repo/semantics/openAccess ; http://creativecommons.org/licenses/by/4.0/
    • Accession Number:
      edsbas.2ECAD85