Item request has been placed! ×
Item request cannot be made. ×
loading  Processing Request

Implicit–explicit integration of gradient-enhanced damage models

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • Additional Information
    • Contributors:
      Universitat Politècnica de Catalunya. Departament d'Enginyeria Civil i Ambiental; Centre Internacional de Mètodes Numèrics en Enginyeria; Universitat Politècnica de Catalunya. RMEE - Grup de Resistència de Materials i Estructures en l'Enginyeria
    • Publication Information:
      American Society of Civil Engineers
    • Publication Date:
      2019
    • Collection:
      Universitat Politècnica de Catalunya, BarcelonaTech: UPCommons - Global access to UPC knowledge
    • Abstract:
      This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://ascelibrary.org/doi/10.1061/%28ASCE%29EM.1943-7889.0001608. ; Quasi-brittle materials exhibit strain softening. Their modeling requires regularized constitutive formulations to avoid instabilities on the material level. A commonly used model is the implicit gradient-enhanced damage model. For complex geometries, it still shows structural instabilities when integrated with classical backward Euler schemes. An alternative is the implicit–explicit (IMPL-EX) integration scheme. It consists of the extrapolation of internal variables followed by an implicit calculation of the solution fields. The solution procedure for the nonlinear gradient-enhanced damage model is thus transformed into a sequence of problems that are algorithmically linear in every time step. Therefore, they require one single Newton–Raphson iteration per time step to converge. This provides both additional robustness and computational acceleration. The introduced extrapolation error is controlled by adaptive time-stepping schemes. This paper introduced and assessed two novel classes of error control schemes that provide further performance improvements. In a three-dimensional compression test for a mesoscale model of concrete, the presented scheme was about 40 times faster than an adaptive backward Euler time integration. ; The research was supported by the Federal Institute for Materials Research and Testing, Berlin, Germany and by the German Research Foundation (DFG) under project Un224/7-1. Additionally, the research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013) / ERC Grant Agreement n. 320815 (ERC Advanced Grant Project "Advanced tools for computational design of engineering materials" COMP-DES-MAT). ; Peer Reviewed ; Postprint (author's final draft)
    • File Description:
      application/pdf
    • Relation:
      info:eu-repo/grantAgreement/EC/FP7/320815/EU/Advanced tools for computational design of engineering materials/COMP-DES-MAT; http://hdl.handle.net/2117/185752
    • Accession Number:
      10.1061/(ASCE)EM.1943-7889.0001608
    • Online Access:
      http://hdl.handle.net/2117/185752
      https://doi.org/10.1061/(ASCE)EM.1943-7889.0001608
    • Rights:
      Open Access
    • Accession Number:
      edsbas.886685A