Abstract: The subject of this study is the quantitative adhesion of a UV-curing composite film based on Bis-GMA (Bisphenol A glycidylmethacrylate) / TEGDMA (triethylene glycol dimethacrylate) as a matrix and particles doped with ferrous oxide on a metal substrate. Two different metal substrates: silver and gold-spattered brass with nickel intermediate coating were used in adhesion evaluating. Adhesion was measured using micro-identation and it was compared with the measured wetting angle of composites to the substrate. It has been shown that the substrates, although with similar mechanical properties that are reflected in very close hardness values, differ by achieved adhesive bonding with the polymer UV-cured polymer film. The addition of ceramic particles in the polymer matrix increased the adhesion of the composite film to both substrates, but the adhesion trend was dependent on the substrate type.
Processing Request
No Comments.